This is taken directly from the Helms. It may be easier than shown by combining steps but this is the way it states to properly get down to the clutch and replace it. I highly recommend that you review all of the illustrations BEFORE you perform any work on your car.
Click any picture to enlarge.
Note step 3 below was illustrated above to get to the clutch assembly. When looking at instructions to change the clutch it would tell you to "Remove the driveline support assembly with the transaxle" in step three to get to the clutch. The top pictures show how to do step #3.
Last edited by eboggs_jkvl; 06-16-2010 at 04:57 PM.
How to Replace a 2007 C6 Clutch
Linear Mode
